Ring terminal This alternative to the spadeterminal is used on heavier components. "Scotchlok" connector The "Scotchlok" connector splices two wires together, using asharp metal blade which pierces theinsulation. This is clamped using a pair ofpliers, and covered with a plastic clip.
If possible, use an insulated in-line crimp connector. Test each mended wire with a circuit tester and battery, connected to the nearest connectors either side of the mend. Re-wrap the exposed section of the loom with self-adhesive or "clingfilm" PVC insulating tape. Put some layers between the exposed section and adjoining wires - not merely a cover over the top - then fit the loom back into the car. Reconnect all terminals and clips, then test all the electrical components involved.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.