The datasheet goes on to say that "the nRESET pin is internally connected to VDD with a pull up resistor of 50 kΩ." So... why are there two options for how to configure the nReset pin when it is not being used? Why not just recommend that it should be left floating (since it is already pulled high internally)? And, if there are indeed technical reasons for when the pin should be externally pulled up to VDD (for better noise immunity, as an example) then let us know what those technical reasons are.
Automatic machines translate to added costs and some such as the depaneling router creates vibrations, noise, and vast amounts of dust. In addition, you need to hold the board firmly. Although laser cutting is precise and has less mechanical stress, it is capital intensive and only applicable to board thicknesses of around 1 mm.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.