The datasheet goes on to say that "the nRESET pin is internally connected to VDD with a pull up resistor of 50 kΩ." So... why are there two options for how to configure the nReset pin when it is not being used? Why not just recommend that it should be left floating (since it is already pulled high internally)? And, if there are indeed technical reasons for when the pin should be externally pulled up to VDD (for better noise immunity, as an example) then let us know what those technical reasons are.
Manual removal of the tabs depends on the design and thickness of the board. Extra care is required since using some tools such as the hook-shaped blade to break the solid tabs between the boards can be challenging and inefficient. For example, if the blade rotates within the small clearance between the boards, it can easily take a bite out of the useful part of the PCB. Also, taping the blade-cutting edge leaves a small part of the tab protruding from the board.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.