Faller also produce lots individual vehicles to add to your road way including Cars, Tractors, Lorries and Buses. These vehicles all use the same power supply to charge the batteries so while a couple of vehicles are running around you could have one on charge ready to go for next time.In addition to vehicles, Faller has produced lots of accessory modules to create life on the roads. These include Bus Stops, Traffic lights, Stop sections and branch off sections. Most are available in both N and OO/HO Scales.
To fit a spade terminal, slip the insulating cover over the wire and push it up the wire, out of the way. Use a wire stripper to remove about 1/8in. (3 mm) of insulation from the end of the wire. Lay the bare strands in the inner section of the connector. Use crimping pliers to tighten the two small tongues firmly around the insulated part of the wire. On the other side of the connector, push the wire strands back and down flat. Hold the connector blade upwards to avoid solder running into the spade part.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.