These are also known as canned motors. Two wires go into them. They often are directly connected to a battery. A switch turns them on. Higher voltages cause them to spin faster. Often geared down in toys, they are designed to spin fast. If turned on and forced to not spin, the motor will heat up, and may even burn up. The motor is made by copper wire covered with clear paint, and wound together in a ball. When the motor heats up too much, the paint turns into smoke, nearby copper wires connect, the motor becomes weaker, the motor heats up more, more smoke comes out, etc. The winding resistance keeps going down. Measure the winding resistance when the motor is new and measure again when there are problems.
Brushed DC motors rotate continuously when DC voltage is applied to their terminals. The stepper motor is known by its property to convert a train of input pulses (typically square wave pulses) into a precisely defined increment in the shaft position. Each pulse moves the shaft through a fixed angle. Stepper motors effectively have multiple "toothed" electromagnets arranged around a central gear-shaped piece of iron. The electromagnets are energized by an external driver circuit or a micro controller. To make the motor shaft turn, first, one electromagnet is given power, which magnetically attracts the gear teeth. When the gear teeth are aligned to the first electromagnet, they are slightly offset from the next electromagnet.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.