Wires are usually connected to components by plastic-covered terminals which push on to a blade on the unit called a spade terminal. Nearly all types of terminals should be fitted to the wire with crimping pliers. There are a few types such as the "Scotchlok" which are secured by clips. For additional security, you can add solder to the wire.
Label wires before cutting them when working on a section of the loom. Before you disconnect anything, make absolutely sure you know how to put it back. Number both sides of each connection with labels made of masking tape. If necessary, make drawings of cable routes and how clips fit. Use a craft knife or razor blade to cut away the wrapping from the damaged section. Take care not to cut into the plastic cable insulation.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.