STARTER SOLENOID "Relay" — All cars are wired so that the batterys main cable connects to the starter motor windings "the thick cable is needed for large current flow, right?". This wire must be switched on and off, of course, and it would be costly and inefficient to route it through the ignition switch "not to mention the size of the switchs components required to carry such current!". Consequently, a relay is necessary.
Push the wire into the connector so that the strands just protrude from the round end. Grip the cable, connector uppermost, in a vice or self-locking pliers, so that the connector rests on top of the vice and cannot slide down the wire when soldering. Inside a bullet connector. Apply solder on the top of the connector, and let it melt and run down inside. Trim off the protruding strands with wire cutters.
Nolanwebdev - Wiring Diagram Images Collection
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.